iK Multimedia Official Authorized HK Macau Distributor 港澳官方授權代理
VIDEO 視頻
iRig Pre HD - The best way to grab your mic sound on the ground
類似型號
All other products shown in the photos or videos belong to their respective owner are not included. Check [Package Includes].
圖中所有其他產品均屬其品牌持有人所有,而且並不是標配, 請查看[Package Includes]
iRig Pre HD
The best way to grab your mic sound on the ground
Digital, high definition microphone interface with studio quality preamp for iPhone, iPad, Mac and PC
Grab your favorite microphone, plug it into your iRig Pre HDand record straight to your device with true studio-quality sound anytime and anywhere. Simple as that.
As pioneers of the mobile music revolution, we know very well what it takes to produce great content on a portable device. Whether you are a musician, podcaster, journalist, videographer or vlogger, you instinctively know how important it is for your content to be the highest quality possible to be well received and how audio plays a critical role in the process.
- MFi microphone interface certified by Apple “Made for iPhone and iPad”
- Works with iPhone and iPad Lightning socket
- Direct monitor switch for real-time monitoring or for playback
- +48V Phantom Power (with 2 x AA batteries)
- Class A mic preamp with onboard gain control
- Onboard headphone output (works with the latest iPhone)
- High definition 24-bit converters with up to 96kHz sampling frequency
- Multicolor LED for easy gain settings
- Includes IK’s renowned, professional software and apps
- Ultra-light and compact
- Sleek and elegant design
- Comes with USB and Lightning cables, 2 x AA batteries and a velcro mounting strip
Microphone Input
- Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: 2 kOhms
- Gain Range: 40 dB
- Phantom Power: +48V ± 4V
- Frequency Response: 20 Hz - 20 kHz +/-1.5dB
- Input Noise: -97 dB RMS, -105 dB(A)
Stereo Headphone Output
- Connector: 1/8” TRS Jack. Tip: right / Ring: left / Shield: ground
- Headphone Level Control numbered thumbwheel
- Headphone Level Power 100mW into 50 Ohms
Other Input/Output
- Device Connector: micro-USB
Common
- Conversion: 24-bit A/D, 24-bit D/A
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- Power:
• USB bus powered when used with a computer
• Battery powered (2xAA included) needed for +48V phantom only
- iRig Pre HD
- Lightning to micro-USB cable
- USB to micro-USB cable
- 2 x 1.5V AA battery
- Velcro strip
- USB-C to micro-USB cable optional (NOT included)
- Size: 40mm/1.57" x 110mm/4,33" x 34mm/1.34"
- Weight: 75g/2.65oz (batteries excluded)
- Cables lenght: 60cm/23.62"
iOS Devices
- Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.
Above Apple devices require the use of below Apple Original Cables whenever necessary and/or applicable:
Important: All third-party cables are not recommended and might cause application failure or unstable.
注意: 不推薦使用第三者連接線,極可能不穩定又或失效.
Computers
-
Mac: macOS 10.6 or later. One free USB port.
-
Windows: Fully supports Windows 10 WASAPI for low latency audio. One free USB port.
Android devices:
- Not compatible
- Local Warranty read www.yutron.com.hk/warranty
EAN / UPC: 8025813738034
After purchase and payment, delivery will be made in the following three working days (subject to ex-stock).
拍購及付款後,三個工作天內發貨 (庫存計).
https://www.yutron.com.hk/delivery
