|
|
ZoomAir 4130 ZoomAir Wireless LAN-to-LAN Bridge Kit
| Bridge Unit | |
| Network Connection Type: |
10BaseT |
| Wireless Bridges per LAN: |
Unlimited |
| Local Configuration: |
System console port (Serial EIA-232-E, DB9 female) |
| Remote Configuration: |
Any wired or wireless LAN station via
Web browser |
| LED Indicators: |
Wireless – Radio, Link and Activity LAN – Link, Activity and Collision |
| LAN Interface: |
10BaseT (will operate on 10/100BaseT networks) |
| Ports: |
2 x RJ45 |
| Power Supply: | 240VAC 50/60Hz to 12VDC @ 1A |
| Base Unit Dimension: |
9.4 in x 7.4 in x 1.5 in 23.8 cm x 18.7 cm x 3.8 cm |
| Mounting: |
Desktop or wallmount |
| Radio Card | |
| Data Rate: |
11Mbps send/receive with fall back to
5.5, 2 and 1 Mbps for extended range |
| Encryption: |
64/128-bit WEP (Wired Equivalent Privacy) |
| Standards: |
IEEE 802.11b, Wi-Fi Certified |
| Effective Radiated Power: |
212 mw |
| Range:
|
Up to 2.5 miles / 4.0 kilometers, unobstructed
line of sight
|
| Anntenna | |
| Antenna Type: | High Gain (13dBi) Directional |
| Antenna Dimensions: | 8.7 in. x 7.9 in. x 1.4 in. 22.1 cm x 20.0 cm x 3.6 cm |
| Antenna Mounting:
|
Ball-socket pivot bracket (included)
|
|
About the ZoomAir
Wireless LAN-to-LAN Bridge Kit |
The ZoomAir Wireless LAN-to-LAN Bridge Kit Model 4130 links two Ethernet Local Area Networks (LANs) in separate locations using a high-speed wireless connection. The Model 4130 maintains a constant connection between LANs that are separated by a road, field, parking lot or other open space. A ZoomAir Wireless LAN-to-LAN Bridge requires only a clear line of sight of up to two-and-a-half miles to provide high-speed data transfers between the two locations. A ZoomAir Wireless LAN-to-LAN Bridge is economical,
providing a rapid return on investment. Installation is usually much easier
and less expensive than a wired installation. The Model 4130 is also an
excellent replacement for a leased phone line, since there are no recurring
monthly charges for service. |
 |
A ZoomAir Wireless LAN-to-LAN Bridge is flexible, supporting high data rates over medium and short ranges with decreasing data rates as the distance spanned approaches two-and-a-half miles. The Bridge hardware is compact and easy to move if an organization’s location changes. The ZoomAir Wireless LAN-to-LAN Bridge is also easy to install and uses the 2.4 GHz radio spectrum. Use of this frequency band does not require a license from the FCC or other regulatory agencies in the U.S. and most other countries. The ZoomAir Wireless LAN-to-LAN Bridge Kit Model 4130 is a complete solution, with all components needed for both ends of the connection provided. The Kit includes: (2) ZoomAir Wireless LAN-to-LAN Bridge Units, (2) ZoomAir High-Gain (13.0 dBi) Directional Antennas, (2) ZoomAir Wireless Network Interface (Radio) Cards, (2) RJ-45 Ethernet cables, (2) antenna coaxial cables, and mounting hardware. ZoomAir Wireless LAN-to-LAN Bridge configuration and
management options include input from a console attached directly to the
bridge, or remote input using any browser software and access through
the attached LAN. To simplify operation, the bridge is maintained through
an embedded graphical user interface (GUI). |
All specifications subject to change without prior notice.